Bitmain Antminer D9 (1770Gh) — 挖矿盈利模拟器

这意味着什么?

At the world-average grid intensity of about 475 g CO₂e/kWh, Bitmain Antminer D9 (1770Gh) running 24/7 for a year releases about 11,651 kg of carbon dioxide equivalent. Here's what that looks like in everyday terms:

你在哪里接电很重要

Electricity is not one thing. A kilowatt-hour from a coal plant carries roughly 820 g of CO₂; the same kilowatt-hour from a hydro reservoir carries about 24 g. That's a 34× difference — large enough that Bitmain Antminer D9 (1770Gh)'s annual footprint swings from roughly 20,114 kg on coal-heavy grids down to about 589 kg on hydro-dominated grids. The single biggest lever a miner has on their carbon footprint is choosing where to plug in.

Regions commonly used for low-carbon crypto mining include Quebec and British Columbia (hydro-dominated, typically <50 g CO₂/kWh), Iceland and Norway (geothermal + hydro, often <30 g), Paraguay (Itaipú hydro), and parts of the US Pacific Northwest. Coal-heavy grids — Kazakhstan, Inner Mongolia, Poland, parts of Australia — sit at the opposite end, often above 700 g CO₂/kWh.

Some operators also reduce their net impact by using otherwise-wasted energy: flare gas at oil wells (burning methane that would be vented anyway), curtailed renewables (wind or solar that the grid can't absorb), or behind-the-meter hydro during off-peak hours. These arrangements can drop effective emissions below the local grid average because the energy would have been wasted or flared without the mining load.

如何减少该矿机的碳足迹

• Pick a greener ASIC. The efficiency column above matters as much as the grid: a 15 J/TH rig emits roughly half the CO₂ of a 30 J/TH rig for the same hashrate.
• Choose a low-carbon host. Data centres advertising hydro, geothermal, or nuclear power typically sit at <100 g CO₂/kWh.
• Look for stranded or curtailed energy. Flare-gas miners, wind-curtailment co-location, and off-peak hydro arrangements use energy that would otherwise be wasted.
• Use heat recovery. Capturing the heat for greenhouse agriculture, pool heating, or district warmth offsets fossil-fuel heating that would have been burned anyway.
• Time-shift your uptime. In grids with high daytime solar, running more during the day and less at night lowers your effective intensity even if you don't switch providers.
• Purchase verifiable offsets. Treat this as a last resort, not a substitute — and favour additional, permanent, third-party-verified projects (Gold Standard, Verra VCS).

常见问题